Yep, but like thesals said, check what you have there first. If you dont have a seperate resistor, the resistance wire is usually just a small section just before the distributor. It should look a little different. If you aren't getting a full 12 volts at the distrib. terminal, go back along the wire, past the resistance part of the wire (if you can tell) and check the voltage at that point. If it's 12v there, just cut and splice in a new piece of equal size wire (dont just twist it, solder it) to your new HEI. You just need a full 12 volts at all times for the HEI. Im about 1 hour from you. I live just outside Amsterdam, about a half hour west of Albany. Im down your way frequently for work. (contractor) John