Hey, I'm not beyond throwing in my 2 cents worth.....
350 block bored 0.030"
3.750" crank
Brodix heads which Eric recommended
KB-102 pistons with 18 cc dish (9.43:1 static, 8.338:1 dynamic) you can run a little more c.r., both static and dynamic with aluminum heads and have no problem running cat piss pump gas, especially with a tight squish.
pop the piston out of the deck 0.006" to make a squish of 0.035". This shouldn't be a problem with the tight-fitting KB pistons (very little piston rock).
Fel Pro 1003 gasket
Edelbrock Air Gap Performer intake
Rochester Quadrajet
Crane cam ground on 112 LDA
http://www.cranecams.com/?show=brows...tType=camshaft