Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: checkin
          
   
   

Reply To Thread
Results 1 to 6 of 6
  1. #1
    305chevyboi is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2006
    Location
    atlanta
    Posts
    47

    checkin

     



    how can you check to see if the all 8cyl are workin an to make sure the compression iswhere it needs to be before i get in to the 305...
    Last edited by 305chevyboi; 11-27-2006 at 06:15 PM.

  2. #2
    BigTruckDriver is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Dec 2004
    Location
    TX
    Car Year, Make, Model: hotrod
    Posts
    1,830

    Quote Originally Posted by 305chevyboi
    how can you check to see if the if all 8cyl are an to make sure the compression is right before i go into my rebuild of the 305...
    yes ,I agree

  3. #3
    305chevyboi is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2006
    Location
    atlanta
    Posts
    47

    Can any body help a young person out with this

  4. #4
    Itoldyouso's Avatar
    Itoldyouso is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    fort myers
    Car Year, Make, Model: '27 ford/'39 dodge/ '23 t
    Posts
    11,033

    It looks like you are asking how to determine how healthy your engine is before you start doing things to it? If that is correct, the first thing you should do is take a compression test of each cylinder and write it down. You are looking for balance between the cylinders. In other words, you don't want one to be 130 and the next one 60 lbs. About 10 percent variation is good, but you can go a little more and still be ok, but not much. Before you do this test, pull all the plugs out, disconnect the coil wire so the car won't want to start, and hold the choke open. Do one cylinder at a time, and let the engine spin several revolutions to peak the gauge.

    There are other tests beyond this, like leakdown, and squirting some oil into the cylinders to determine if any low compression is valves or rings, but do the compression test first.

    Some of the really good mechanics on here will have better ways to do this than I have outlined, I'm sure, but these are the basics.

    Ok good engine guys, what should he do next??


    Don

  5. #5
    305chevyboi is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2006
    Location
    atlanta
    Posts
    47

    ok thanks alot cuz i dont want to have a dud but when the motor is runnin its sound fine no leaks or nothing.... Next ? how does a underdrive belt system help me out cuz for a 100 buck i can have it on my car

  6. #6
    skids72's Avatar
    skids72 is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2005
    Location
    Lafayette
    Car Year, Make, Model: 68 Firebird 439 BBC
    Posts
    745

    IMO underdrive pulleys (I assume for alternator, wp, ps, etc) are a waste unless you're planning serious racing and probably even under those circumstances. Theory is reduces load on motor by spinning accessories slower but can wreak havoc on the charging system and could lead to cooling problems. Another supposed benefit is it is harder to throw a belt... unless you're planning a race-only car with a battery charger in the pits, I wouldn't recommend but maybe other opinions?

    2 cents,

    Chris

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink