Thread: Cylinder VE Question
Results 1 to 2 of 2
LinkBack URL
About LinkBacks-
04-22-2007 05:43 PM #1
CHR Member
- Join Date
- Nov 2006
- Location
- west olive
- Car Year, Make, Model: 1997 S-10 357c.i.
- Posts
- 225
Cylinder VE Question
I was running some numbers on a cam overlap setup and found on this particular layout, that the effectual cylinder length ( man I hope I'm 'splainin this right
) was 2.56 inches. I take it that this is the actual closed cylinder length , with both valves on the seat, that the combustion stroke has to work with. Is that correct?
If so, on a street engine with a 3.48 stroke, is that a high end use number or the low end figure?? Ready for a lesson here o' knowlegeable ones. 
"oohh...thats gonna leave a mark!"
1997 s-10, 357 C.I., 350 turbo, speedpro 11:1,Comp Cam custom grind mech. roller, Canfield heads, 1.6 roller rockers, edelbrock tm-1, holley 750sp, Hooker Headers, MSD, 3K B&M stall, 4:11 gears
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
04-22-2007 07:40 PM #2
CHR Member
- Join Date
- May 2004
- Location
- so.cal
- Car Year, Make, Model: 66 c 10 fleetside longbed
- Posts
- 1,942
Here is a very good read for you that will help exsplain.
http://www.popularhotrodding.com/tec...ics/index.htmlIts gunna take longer than u thought and its gunna cost more too(plan ahead!)
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I finally fixed that annoying noise in the car. I just opened the door at 60mph and pushed him out. .
the Official CHR joke page duel