Thread: Engine breathers
-
11-23-2007 05:18 PM #1
Engine breathers
Could anyone please help me with identification of this breather (screwed into the fuel block off plate)... I am desperate to find a manafacturer!
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-23-2007 07:13 PM #2
No idea, but its a pretty trick piece.Joe Barr
1932 Ford Roadster
-
11-23-2007 08:16 PM #3
Other then eye candy, can't figure out what it would be for...certainly way too low on the engine to be a breather... Going by the rest of the billet stuff on the engine, I'd bet it's a one off.Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
-
11-23-2007 08:32 PM #4
i cant not help but i did a big block like this it vented thru the fuel pump rod i block the lifter valley off to keep the oil off the crank and returned the oil out of the valley out side of the block back in the oil pan.by the looks more like some place to add oil there is a oil drain back in the fuel pump cavity .Last edited by pat mccarthy; 11-23-2007 at 09:42 PM.
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
-
11-24-2007 03:50 AM #5
IM with Dave and Pat,looks like some good old American Ingeuity at work.Do's it have holes in valve covers.
-
11-25-2007 12:06 AM #6
no that is what i am trying to get away from, hence why i wanted to try and find out more info on it. looks like my mate with the cnc is getting a bit more work!!
-
11-25-2007 03:35 AM #7
IF you don't have oil fill holes in valve covers,buy new ones and remove the breather from fuel pump mount and replace it with A block off plate.
And a Happy Birthday Wish for Mr. Spears. Hope you can have a great one. :)
A little bird