Thread: Valves just wont shut up!
Results 1 to 8 of 8
LinkBack URL
About LinkBacksHybrid View
-
01-02-2004 03:22 AM #1
CHR Member
- Join Date
- Jan 2004
- Location
- crystal river
- Car Year, Make, Model: 1987 s10 ext cab
- Posts
- 12
the rockers are aftermarket stamped 1.6 with stock pressed in studs, the lock nuts are new dimpled. I adjust the valves with the motor running hot. I pull one valve cover at a time and adjust all the valves. I losen the nut untill i hear tap and adjust it back down untill it stops, then I tighten it down a half turn more.If you love small blocks than there is only one thing you need to do with it. Just-Speed
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Several years ago we did quite a good trip of USA, and on our trip we got to meet Mike and Christine Frade. We didn't stay long with them, but in that relatively short time we both gained a great...
We Lost a Good One