Thread: So u wanna guess?

Tweet

So i wanted to see what all of you think my combo and what u think it will make for hp/tq...and possible times....

Combo is

355
11.2.1 compression
patriot performance CNCd 195's 64cc
performer rpm air gap manifold
eldebrock 750 1407
bracket master cam 230/230 292/292 and 480 lift on I and E
1.6 rockers
stock rods/crank with 100 dome hypers....
hooker side pipe exhaust


and i have a superpower shot layin around....so if not quick enough have a 100/150 shot ready for it.....and its a 1980 L82 Corvette.....turbo 350...3500 stall....and 3.70's...

so what do u all think?

and also should i be worried about the stock rod and hypers...at that compresion/hp....and with nitrous.....good or bad idea.....

Thanks...

I don't have a dyno program so I would only guess at 375 hp. The rods are probably good for 6000 rpm, after that, I would be nervous especially with the nos.

Be very worried if your stock Rods where not re-sized with ARP bolts . And your Hyper Pistons will not Take much Heat from Nitrous . I would change that camshaft and go with 1.5 Rockers . But as is I would say about 425 HP . Them Heads sure do help with this HP# . But if your Rods are stock it will be short Lived .

The Comp Cams CamQuest program estimates 498 hp and 520 torque