Thread: Doug Herbert lifters???

Tweet

Anybody using his lifters in a mostly street motor.

Wiped two cam lobes and two mechanical roller lifters, Comp.

Putting new cam and lifters.
Comp has Endure-X
Crower has HIPPO lifters.
Doug has:

Lite Roller Lifters Direct Lube
Chevy Small Block vertical bar
HERTCV-L $358.99

Precision design for greater durability and strength. Designed and manufactured by the original designer of the roller cam for automotive use. High strength design for dependability. Easy drop in design, no machine work to block required. 100% Made in the USA.


Lite Direct Lube Mechanical Lifter

Set of 8 Pairs

and a cam from Doug

8620 Billet Roller Lifter Cam
RPM Range: 2500-6800; Lift: .585/.600; Advertised Duration: 282/291
57-87 Chevrolet SB V8: 262, 267 (4.4L), 283, 302, 305 (5.0L), 307, 327, 350 (5.7L), 406
HERCC6K $209.99

It was 1949 when the first roller cam was manufactured for the performance automotive engine, and it was Chet Herbert Cams who designed and ground it. Since then Chet Herbert Cams has been the leader in roller cams. Today?s rollers feature faster ramp speed and higher lifts for the ultimate in power. Herbert roller cams are manufactured from the finest 8620 steel billet alloy steel bar stock. We've designed and produced cams for drag racing, oval track, road racing, boat racing, truck and tractor pulling, mud racing and even Bonneville land speed racing. Don't let the sticker on the side of the car fool you, many winning racers that run a Herbert Cam don't run a Herbert Cam sticker. The following grinds are just some of our most popular racing profiles. Please see our master list in our free catalog or call for more assistance, tech line at (704)435-0095.

Rough idle, good mid range torque, 10.5:1 advised, oval track/bracket racing

RPM Range: 2500-6800Advertised Duration: 282/291Duration @ .050: 244/252Lift: .585/.600Lobe Center: 106c


Maybe not this cam, but something close to it....at lease it will not be made in China

Had a Comp cam grind 300AR range 3000 to 7000...

i liked the .604/.604 solid roller cam, i was gonna go roller but to expensive at the moment, and use either isky roller lifters or crowers. im sure herberts are good as well. pat will chime in.....