Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Engine Swap
          
   
   

Reply To Thread
Results 1 to 4 of 4
  1. #1
    stinger99's Avatar
    stinger99 is offline Registered User Visit my Photo Gallery
    Join Date
    Dec 2008
    Location
    Louisville
    Car Year, Make, Model: 66 Chev C10 LB
    Posts
    2

    Engine Swap

     



    Just getting ready for the Street Rod Nationals next weekend. Cranked up the truck to move it to the wash rack and the old 327 (stock original) sounds like it bit the dust, A bunch of rattling and metal sounds. Looked at the top sides and all looks OK oiling, no visible damage and tight.
    No time to fix it now, I need to drop a new engine in.
    Question: What all will fit? Given an option what's the best value and most buildable block.
    Engine sets in a 1966 Chev C10 with a 700r4. I have a custom 3" stainless exhaust system bolted to a set of ceramic headers and do not think I have time to modify before the show. So I need a pretty good fit.

    Thanks in advance

  2. #2
    Dave Severson is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Madison
    Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
    Posts
    21,160

    Most any old small block chebbie will be a bolt in....
    Yesterday is history, tomorrow is a mystery, Live for Today!
    Carroll Shelby

    Learning must be difficult for those who already know it all!!!!

  3. #3
    glennsexton's Avatar
    glennsexton is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Mar 2005
    Location
    Tigard
    Car Year, Make, Model: 63 Nova SS
    Posts
    2,584

    Budget dictates - anything from a period correct 327 to a full tilt boogie 383 crate motor will pretty much bolt in. Remember if you want to do less than a full engine that your 66 has a short water pump and as I recall, the oil fill tube is in the front of the intake. Also consider the mounting holes on the front the heads to me sure all of your accessories will be compatible.

    How Fun!
    Glenn
    "Where the people fear the government you have tyranny. Where the government fears the people you have liberty." John Basil Barnhil

  4. #4
    Itoldyouso's Avatar
    Itoldyouso is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    fort myers
    Car Year, Make, Model: '27 ford/'39 dodge/ '23 t
    Posts
    11,033

    IMO the Goodwrench basic crate engine is a super deal. Used to sell for $ 1300 range, but I think now they are up around $ 1800. Still a deal. If you want, slip in a mild cam and bolt on your old manifold, headers, etc. Even comes with a warranty.

    I installed one in a guys vette a while back and it was the easiest, cleanest swap I ever did. No fussing with a dirty junkyard block and/or rebuilding the old engine.

    Don

    Here, I just looked on line. This is only one place, if you shop you may find a better deal yet.

    GM Goodwrench 1970-85 350 Engine & Packages

    GM Performance
    GM Goodwrench 1970-85 350 Engine & Packages

    Product images may differ from actual product appearance.

    This universal 350ci engine uses a brand new block and can be used as a replacement for most GM vehicles from 1970-85. It produces 260 HP and 350 ft/lbs of torque with a 4-bbl carb and headers. It can be used as a replacement or as a retrofit into almost any vehicle. This brand new crate engine comes with a GM warranty and is covered for 3 years or 100,000 miles in applicable GM vehicles only.

    Specifications
    # 4-bolt main with 2-piece rear main seal
    # Cast iron crankshaft
    # LT1/LT4 powdered metal connecting rods
    # Cast pistons (dished)
    # Hydraulic flat tappet cam (.383''/.401'' and 112° lobe separation)
    # Cast iron cylinder heads with 76cc chambers
    # 8.5:1 compression ratio
    # Left and right hand dipstick
    # 4-quart oil pan
    # Timing tabs for a 6-3/4'' or an 8'' balancer
    # Recommended spark plug: Accel #111-574 or any spark plug with 14mm .460'' reach, 5/8'' hex, tapered seat, projected tip

    Engine Components Package 1 #809-10067353K1
    Includes GM Goodwrench engine and the following products to make your new engine run!
    # Edelbrock Performer Intake Manifold
    # Edelbrock Performer 600 cfm Carburetor
    # ARP Intake Bolts
    # Proform Chrome Valve Covers, Wing Nuts, and Dipstick
    # JEGS Intake Gaskets
    # JEGS HEI Distributor
    # JEGS HEI Coil

    Engine Components Package 2 #809-10067353K2
    Includes GM Goodwrench engine and the following parts to increase the performance and looks of your new engine.
    # Edelbrock Performer Air Gap Intake Manifold
    # Edelbrock Performer 600 cfm Carburetor with adapter plate
    # Proform Metallic Grey Dress-Up Kit
    # JEGS Intake Gaskets & Bolts
    # JEGS HEI Distributor
    # JEGS HEI Coil

    Warranty Information


    Crate Engine
    GM Performance 10067353 - GM Goodwrench 1970-85 350 Engine & Packages
    809-10067353
    GM Goodwrench 350 Engine
    $159.00
    $1,569.99
    Ships
    Monday

    Engine Components Packages
    GM Performance 10067353K1 - GM Goodwrench 1970-85 350 Engine & Packages
    809-10067353K1
    GM Goodwrench 350 Engine Components Package 1
    $159.00
    Easy Kits
    $2,217.99
    Ships
    Monday

    GM Performance 10067353K2 - GM Goodwrench 1970-85 350 Engine & Packages
    809-10067353K2
    GM Goodwrench 350 Engine Components Package 2
    $159.00
    Easy Kits
    $2,400.99
    Ships
    Monday


    * Fast Worldwide Delivery
    * 100% Satisfaction Guaranteed
    * Large In-Stock Inventory
    * We Will NOT be Undersold
    * Easy, No-Hassle Returns
    * Secure Shopping
    Last edited by Itoldyouso; 08-01-2009 at 11:15 AM.

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink