Thread: What head CC might these be
-
12-22-2009 09:32 AM #1
What head CC might these be
I have an engine I took out of a 98 Z71. 350 FI. The heads have a three tooth saw tooth on the front and back. Looking under the valve cover all I can find is L207 and GM 0. There is a guy that is interested but wanted to know what CC they are. Does anyone know or is there more info I need to provide?
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
12-22-2009 09:44 AM #2
A number would be good - usually in the middle of the head, between the center valves.."Where the people fear the government you have tyranny. Where the government fears the people you have liberty." John Basil Barnhil
-
12-22-2009 09:46 AM #3
.560 lift
Just found out the guy is building a .560 lift roller motor.
-
12-22-2009 09:46 AM #4
-
12-22-2009 09:50 AM #5
found it 12558062
-
12-22-2009 10:48 AM #6
12558062 64cc 1.94 1.50 1998 L31 Vortec truck, 170cc intake ports. 350
-
12-22-2009 01:08 PM #7
Again. Thank you guys!!
I tried rubber isolators between the frame and pump, but it made little difference. I don't mind spinning the motor over to refill the carb(s), it allows time to build oil pressure, jmho..
1968 Plymouth Valiant 1st Gen HEMI