Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Front Cover Oil Seal
          
   
   

Reply To Thread
Results 1 to 5 of 5
  1. 04-24-2010 02:46 PM #1
    DaveH71
    DaveH71 is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Apr 2010
    Location
    Whitby
    Posts
    4

    Front Cover Oil Seal

     



    Can the front (timing) cover oil seal be changed without removing the cover from the engine?

    If not will I need anything other than the seal, timing cover gasket and oil pan gasket set?
    Reply With Quote Reply With Quote
  3. 04-24-2010 02:51 PM #2
    sg4356's Avatar
    sg4356
    sg4356 is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Apr 2009
    Location
    Corinth, Texas, United States
    Car Year, Make, Model: 32 ford roadster
    Posts
    410

    Yes it can be change with out removal
    Sometime Kool is the Rule But Bad is Bad
    Reply With Quote Reply With Quote
  4. 04-24-2010 06:59 PM #3
    DaveH71
    DaveH71 is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Apr 2010
    Location
    Whitby
    Posts
    4

    Can you expand on this?

    What is the procedure?
    Reply With Quote Reply With Quote
  5. 04-24-2010 07:21 PM #4
    sg4356's Avatar
    sg4356
    sg4356 is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Apr 2009
    Location
    Corinth, Texas, United States
    Car Year, Make, Model: 32 ford roadster
    Posts
    410

    remove the balancer pull old seal out , install new seal. you will need to have a puller and installer for balancer.
    Sometime Kool is the Rule But Bad is Bad
    Reply With Quote Reply With Quote
  6. 04-24-2010 09:37 PM #5
    pat mccarthy's Avatar
    pat mccarthy
    pat mccarthy is offline CHR Member/Contributor
    Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    nice to have a driver to put the seal in driver can be made or if you have some very big deep sockets or if you know some one with a lathe can cut one out of hard wood or metal . or pipe with a plate welded to end drive it .it will need to be nice and flat wider then the seal face so you do not cup it and pop the spring out of the back of the new seal
    Last edited by pat mccarthy; 04-24-2010 at 09:57 PM. Reason: so someone other then me can read it ?????
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
    Reply With Quote Reply With Quote
Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink