maybe its time to go back to the basics the first thing to check as in any electrical problem is powers and grounds the coil needs full bat. voltage in about 13volts the wire from the coil to the dist. goes to the module that is just a switching transistor it turns off and on the ground when it is on it allows power to flow through the coil to charge it then the pick up tells the module to open the magnetic field collapses and you have spark then the pick pu tells the module to close and the process is repeated so if you have full bat. voltage at the coil it is time to look at the ground make sure the dist. is grounded to the eng. and the eng has a good ground back to the battery remember a good dvom is your friend.......ted p.s. there is no magic