Thread: Valve Train Noise

Tweet

well the valve to valve guide sounds to be to tight ??? if your saying that the lifter is not bad its a hyd roller lifter lifter not hitting the block . the push rods are not bent or tips not burnt up . your rockers are not hitting any where out side or in or inside of valve cover bafflles . you moved that rocker still getting sound off the cylinder ? with deferent rocker . then its a bad valving in that lifter . or sticky valve .or hitting the piston . burnt header gasket sound just like a rocker . mild lift is how i check my push rod geomerty so at 1/2 the lift of the cam you should be on center of valve stem face