Thread: Valve Train Noise

Tweet

Followup:

Sorry I have not gotten back sooner on my findings. Grabbed some calipers, did some measuring and did find track was slightly off between the two valves on #1. Had enough movement in the guide plate to get track dead center. Did the past 3/4 then back to 0 then 1/2 guidance. Reassembled and still have the tick. Well, can not say we did not try. Going to pull apart to get to lifters and RMA them back to Comp.

More concerning now is when I popped of the cover this time, found another serious heat discoloration in the roller on rocker on intake now on problem area and found distress that is appearing on a couple of others in that bank. Going to RMA those to I suppose

I attached a few photos of the distress of the roller and additional photos of geometry just to make sure it looks OK to everyone.

Jeff