Thread: Help me out, thinking weird again

Tweet

Originally Posted by jerry clayton

PLAN????? of course---Dave, what do you want for valve covers????

I want the ones that don't leak!!!!!

Chevy valve covers don't leak

Dave,Dave,Dave......................ya gots to buy the clear ones soooooooo ya can see where their leaking.

Originally Posted by Dave Severson

I want the ones that don't leak!!!!!

M/T s covers and if you do not want leaks do not put any oil in it

Originally Posted by pat mccarthy

M/T s covers and if you do not want leaks do not put any oil in it

They'd be kewl!!!! Got to put that on my search list for upcoming swap meets!

Something to consider while pondering rocker box covers, i bet you'll wind up with jesel. Only a few covers have enough clearance. I know of nothing vintage, they are all too narrow. I got a beautiful old set of weiand finned i'd offer up but they won't work for either stud girdle nor jesel.

Originally Posted by ojh

Something to consider while pondering rocker box covers, i bet you'll wind up with jesel. Only a few covers have enough clearance. I know of nothing vintage, they are all too narrow. I got a beautiful old set of weiand finned i'd offer up but they won't work for either stud girdle nor jesel.

they make cast spacers for the covers so they still can be use or if he can not find any i know some guy on here all the time that can has for the jessel or T&D. there nice. with 7/16 studs and a good rocker arm with a Jomar bar he can make this work . would a shaft rocker be nice yes but he can get by with out it is up to him it is dave money if your thinking there not wide enough please explain ? every thing has to fit inside of the oil rails of the head . springs rockers Jomar bars . so the covers should not be to narrow. rockers are just 1.6 and springs would be a 1.550 pac spring so were would they hit ? if needed to be taller you use a spacer i done it many time s on the bbc