Thread: SBC 350 build
Results 1 to 15 of 49
LinkBack URL
About LinkBacksThreaded View
-
02-13-2011 06:44 PM #9
CHR Member
- Join Date
- Feb 2011
- Location
- Waterloo
- Car Year, Make, Model: 71 Chevy C10
- Posts
- 12
Yep, I think the vortec heads with the COMP springs will be my best option. I will be sure to pull my rear-end cover and see what I have for gears. I'll be putting in new bearings all around in the bottom end of things and likely put in new pistons if the cylinder walls seem all good. You said not to run too much lift on my cam, what would you recommend for max lift I should run for a daily driver?
I was looking at the COMP XE274H
In lift-.490 lift
Ex. Lift-.490
In @.50-230
Ex. @.50-236
LS-110 degreesLast edited by Bowtiepickups; 02-13-2011 at 06:56 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Several years ago we did quite a good trip of USA, and on our trip we got to meet Mike and Christine Frade. We didn't stay long with them, but in that relatively short time we both gained a great...
We Lost a Good One