Thread: road demon jr.
-
03-09-2004 08:18 PM #1
road demon jr.
Ok let me start off by saying I am building a 350(washed it down today and start tearing down tommorow) I am running stock flat top pistons comp. should be around 9-1 I am using the vortec heads. I was planning on using the extreme energy 262 cam, but tech says these are hard on the valve train so I am still considering. Stock manifolds dual exhaust.(headers are great if you don't have to work around them) I have had a built 454 about 350hp and a car with an lt-1. This is my 3rd vehilcle (i am 20) and my fisrt rebuild (with my dads help) I want good power and decent mileage. I am going to run a/f ratio gagues on both sides of the exhaust and I really wan't to tune this motor well. I haven't had the much experience tuning carbs, but the only you learn something is to do it right. So after all that is said, the only choice I have not made yet is wich carb. On my 454 I had an edelbrock and had no problems and that is what my dad runs( who is NOT a hot rodder) but I have heard the these carb are suposed to be pretty good. I want to know if anybody has had any experince with the road demon jr. 625cfm ( reliability ease of adjustment etc.... ) in comparison the the edelbrock performer 600cfm.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
03-09-2004 09:22 PM #2
I looked around the internet and found predators site. Sounds like a good carb,but not a lot of info. I didn't see a price for them anywhere either. I searched this site and found a post that you quoted a price of around 375. I was wanting to keep it under 300, but if it is worth the extra I will spend it. If you could give me a site where they sell them at that would be cool too. Thanks for the info---Dirk
-
03-10-2004 04:17 AM #3
Hey Dirk, make this the 2nd vote for the Predator. I have ran them on the street, drag strip, and dirt track. They work......
Ps---This is the only thing Streets and I agree on! Tee Hee HeeYesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
-
03-10-2004 07:27 AM #4
I think that I will pass on the predator for now $542 form jegs while the race version is $442? I will only have $1000 in my long block. When I build real hipo motor I will probably spend the cash and get one. For now I will just stick whith what works and pick up an edelbrock.
Thanks guys! One more trip around the sun completed. Lots of blessings and things to be thankful for (like still being able to type this message!!) Here's to us "over 70 guys.." Glenn
HBD Glenn!!