Thread: Condensation in motor
Hybrid View
-
10-20-2011 03:42 PM #1
you running alcohol for fuel ? if so yes . you may want to try brad penn oil. water will not mix has EZ with it. you have hi humidity were you are it.s something you may have to live with. less your block is cracked or studs are weeping throw two tubes of that alum dust in the rad ..you can buy at the auto parts store it works good for head studs and boltsIrish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
-
10-21-2011 04:02 AM #2
Thanks Pat I feel better now I thought about using a heated oil stick to kept it warm. I run 112 oct. and use Rotella. My engine builder is a very good builder and has built several motors that run at our track and he said the other guys have had the same problem and he said the same thing to the other guys as you said run there engines alittle to get the heat up and we live in S.E. Ga and the humidity is killer down here. Pat I got another question about another engine but I'll start a new thread. Thanks again
Friday and Saturday (4/11 & 12/25) Chris (my wife) and I made the journey to Homestead-Miami Speedway so I could participate in the Florida Power & Light sponsored Electrathon event.:cool: It was...
Electrathon - A Different Kind of...