Thread: Help with SBC cam selection
Results 1 to 11 of 11
LinkBack URL
About LinkBacksHybrid View
-
02-20-2012 08:57 AM #1
CHR Member
- Join Date
- May 2011
- Location
- Sacramento
- Posts
- 24
Back in the 70's I run Isky #201262 cams that had 262 degrees advertised duration, .435 lift, and 108 degree lobe center in SBC 4X4's. Good low end torque and gave a bit of a lope at idle due to the lobe center. This cam made good low end torque and worked real good with a 2 plane intake manifold and up to a 650 cfm carb. 600 cfm carb worked best.Last edited by sbcguy; 02-20-2012 at 09:00 AM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Ditto on the model kits! My best were lost when the Hobby Shop burned under suspicious circumstances....
How did you get hooked on cars?