Thread: Help with SBC cam selection
Results 1 to 11 of 11
LinkBack URL
About LinkBacksThreaded View
-
02-20-2012 08:57 AM #8
CHR Member
- Join Date
- May 2011
- Location
- Sacramento
- Posts
- 24
Back in the 70's I run Isky #201262 cams that had 262 degrees advertised duration, .435 lift, and 108 degree lobe center in SBC 4X4's. Good low end torque and gave a bit of a lope at idle due to the lobe center. This cam made good low end torque and worked real good with a 2 plane intake manifold and up to a 650 cfm carb. 600 cfm carb worked best.Last edited by sbcguy; 02-20-2012 at 09:00 AM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Several years ago we did quite a good trip of USA, and on our trip we got to meet Mike and Christine Frade. We didn't stay long with them, but in that relatively short time we both gained a great...
We Lost a Good One