Thread: extra thin head gasket
-
03-20-2004 01:58 PM #1
extra thin head gasket
I want to raise the compression of my 305 that was bored .060 over and since the block was decked, I wanted to know how thin could I go on a head gasket? Is 0.020 to thin?Keep smiling, it only hurts when you think it does!
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
03-20-2004 02:30 PM #2
Hey chevy, I wouldn’t go any thinner than that which would give me .040 clearance between the top of the piston and the head otherwise the piston will kiss the head.Objects in my rear view mirror are a good thing unless,.... they have red and blue lights flashing.
-
03-20-2004 03:41 PM #3
If I can find a gasket thats .020, I will still have enough clearance.Keep smiling, it only hurts when you think it does!
I know what you mean about the Holley pumps being noisy, had a couple of customers who used them. On the pumps I use I used to stuff rubber grommets in the mounting holes, but found that really...
1968 Plymouth Valiant 1st Gen HEMI