Thread: Rebuilt SBC Smoke
Results 1 to 3 of 3
LinkBack URL
About LinkBacks-
09-03-2012 10:47 AM #1
CHR Member
- Join Date
- Jun 2011
- Location
- st. anthony
- Posts
- 8
Rebuilt SBC Smoke
I just had my 350 sbc rebuilt and put in my car. It was a total rebuild including the heads. On the first start up it had hardly any smoke and ran fine. The only problem is when I give it hard acceleration it starts to smoke really bad, and wont stop. After letting it sit for about a day i went and started it and it hardly smoked so i took it for a drive and it started doing the same thing again! What could it be?
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
09-03-2012 10:58 AM #2
CHR Member
- Join Date
- Aug 2003
- Location
- CC
- Car Year, Make, Model: 70 Camaro Z-28 Now/40 Chevy Back Then
- Posts
- 4,306
Did they do anything to the valve guides?
Could be hard acceleration on new unseated rings is not a good idea.
PCV valve stuck?
Intake gaskets not sealing?"PLAN" your life like you will live to 120.
"LIVE" your life like you could die tomorrow.
John 3:16
>>>>>>
-
09-10-2012 07:11 PM #3
CHR Member
- Join Date
- Jun 2011
- Location
- st. anthony
- Posts
- 8
The valve guides were replaced when rebuilt. Im going to check out the intake gasket and the PCV tomorrow and ill see what happens!
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Several years ago we did quite a good trip of USA, and on our trip we got to meet Mike and Christine Frade. We didn't stay long with them, but in that relatively short time we both gained a great...
We Lost a Good One