Thanks guys, I totally understand!

Techinspector1: no, not at all, it is idled at 750rpm if I don't set the choke, 1250ish if I set the choke and 850rpm warm. I had a screwdriver because the drivers side was running richer (pass side 2.5 turns out, driver side 4.5 turns out on idle mix screws) if I go any higher it will occasionally diesel if I shut it off when it idles say 1,200rpm. It will "choke" as I can describe.

I can see why you would say this but it idles that way if I don't have choke on. It was a warm day just a cold start.

Did you notice how the idle was uneven the first couple seconds? Because it wasn't warm