10Likes
Thread: Convert a chev 283 to 307 or bigger
Results 1 to 12 of 12
LinkBack URL
About LinkBacksThreaded View
-
06-07-2014 10:54 PM #10
CHR Member
- Join Date
- May 2003
- Location
- Zephyrhills, Florida, USA
- Car Year, Make, Model: '32 Henway
- Posts
- 12,423
Needs shorter pushrods. Distributor gear material and cam gear material must be compatible. Ask the cam grinder to be sure what distributor gear material to use. Needs thrust button at the front of the cam. Some guys will use a cast aluminum front cover for the rigidity of it when using a thrust button. Other fellows will go the low-buck route and weld a piece of 1/8" thick steel plate into the stock front cover to prevent the thin sheet metal from "oilcanning".
Originally Posted by sharpmark
.Last edited by techinspector1; 06-08-2014 at 12:01 AM.
PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Ditto on the model kits! My best were lost when the Hobby Shop burned under suspicious circumstances....
How did you get hooked on cars?