Thread: Oil pressure problem

Tweet

sounds to me that you have a oil galley plug out your dumpping alot of oil some were galley plug out blocks has a hole in it. crank oilling holes not in the right. spot or when they drill the crank pins they hit a oling hole or bearing not covering the cranks oiling holes . lifters oil band dropping to low or to hi and dumping oil of lifter band .oil pump not setting on main cap flat .do you have the two plugs on the lifter cross over in the lifter valley ? and the 3 upper plugs in cam tunnel front under the timming set is this block a SHP or a little M ? dart block