Piston part is 400AB (i think, at work right now cant remember exactly) sealed power pistons. Havent actually measured deck height other than how far down the pistons sat. How do I measure the deck height? SBC stock is 9.025 correct?
Yeah on the 64cc heads, good price, probably not the best available by any means but the price is right $700 comeplete for the set with 2.02/1.6 valves and springs set for .60 lift. They will be drilled with steam holes already. Yes on roller set up, have been looking at howards actually. I just dont know how to correlate the numbers to how it will sound. I want the perverbial "best of both worlds" a nice lope with usable power band. carb i was thinking along the 750cfm route, intake: edelbrock performer, long tube headers. Looking to build a street engine that will fry the tires when the time is right, and sounds "healthy"........ based on cam then i would choose the correct torque converter for the 700r4.