Results 1 to 3 of 3
LinkBack URL
About LinkBacksThreaded View
donmcgowen 
-
02-09-2015 01:20 PM #1
CHR Member
- Join Date
- Feb 2015
- Location
- Hanover Park
- Posts
- 21
Help identifying cylinder heads
I have a set of heads that have been sitting around for about 15 years. I believe they are Dart II Sportsman heads, but the intake and exhaust castings are very rough. Doesn't seem like an aftermarket head would be this rough but I'm going to have them ported if they are good heads. They have 2.02/1.6 valves, 1.5" or 1.54" double valve springs with dampers, valve guides, 64cc chambers, at least they look 64 by the shape of the chambers. I need to determine if these are decent heads that I can work with. They seem like good heads with 2.02 valves, nice valve springs, I was just concerned with how crappy the castings are for the intake and exhaust runners. They are very rough and the intake runner shape is that that great.
https://www.dropbox.com/s/vv9pgg9cm3...51331.jpg?dl=0
https://www.dropbox.com/s/r5pvplsd4a...51431.jpg?dl=0Last edited by donmcgowen; 02-10-2015 at 07:45 AM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
A travel agent was sitting at his desk when he noticed an elderly couple standing outside, gazing longingly at the posters of dream vacations in the shop window. They looked sweet, and honestly, a...
the Official CHR joke page duel