Thread: Help identifying cylinder heads
Results 1 to 3 of 3
Threaded View
-
02-09-2015 01:20 PM #1
Help identifying cylinder heads
I have a set of heads that have been sitting around for about 15 years. I believe they are Dart II Sportsman heads, but the intake and exhaust castings are very rough. Doesn't seem like an aftermarket head would be this rough but I'm going to have them ported if they are good heads. They have 2.02/1.6 valves, 1.5" or 1.54" double valve springs with dampers, valve guides, 64cc chambers, at least they look 64 by the shape of the chambers. I need to determine if these are decent heads that I can work with. They seem like good heads with 2.02 valves, nice valve springs, I was just concerned with how crappy the castings are for the intake and exhaust runners. They are very rough and the intake runner shape is that that great.
https://www.dropbox.com/s/vv9pgg9cm3...51331.jpg?dl=0
https://www.dropbox.com/s/r5pvplsd4a...51431.jpg?dl=0Last edited by donmcgowen; 02-10-2015 at 07:45 AM.
I am very sad to post that Mike Frade, Screen Name 34_40, passed away suddenly yesterday, April 4th, 2025, at home in New Mexico. Mike's wife Christine shared that Mike had come in from working in...
We Lost a Good One