I preach putting all the components on paper and figuring it all out before you ever buy one part. If you had done that and run the math, you would have realized that you needed to perform some other operations on the block and make some different parts choices before you bolted the whole mess together.

You didn't bless us with the dome volume of the pistons, but I'll assume Icon IC6732-030 @ 6.3cc's.
4.03" bore x 3.48" stroke, 64cc chambers, 9.005" stack, 9.005" block deck height (zero deck), Cometic C5245 head gasket, 4.060" x 0.036" would have given you a 12.13:1 static compression ratio with a 0.036" squish/quench. The motor would be ready for aluminum heads and a 248/252 solid roller cam.

The block deck height is not sacred, you have to be prepared to alter it to suit your needs.

.