23Likes
Results 1 to 15 of 38
LinkBack URL
About LinkBacksThreaded View
-
11-30-2015 07:01 PM #36
CHR Member
- Join Date
- Feb 2006
- Location
- Bartlett
- Posts
- 6,831
just to let you know how it works---blocks are set up with a fixture that has a 2' solid bar throw adapter rings that size it to the main bore-then a center bar with centering cones is installed in the cam bore and block is centered on those two axis-there is a plate at the end that has the indicating surfaces on to measure to deck at the 45* each way------then there is a triangular piece that you can put in any cylinder against the wall and indicate to main diminsion established from the front plate.
http://www.bhjproducts.com/bhj_conte.../bt1_intro.php
http://www.bhjproducts.com/bhj_conte...tfixt/dhbe.php
http://www.bhjproducts.com/bhj_conte...ntfixt/btk.phpLast edited by jerry clayton; 11-30-2015 at 07:26 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Several years ago we did quite a good trip of USA, and on our trip we got to meet Mike and Christine Frade. We didn't stay long with them, but in that relatively short time we both gained a great...
We Lost a Good One