Thank you Denny,
Plugs are new and correctly gapped. Wires are new and ohm checked good. Distributor is brand new as the sticking vac advance on old distributor seemed apparent after replacing vac module. Hence the new Accel Distibutor has (and I checked) new springs. Timing has been checked with vac. advance disconnected and plugged. No rpm gauge (yet) but would call it around 900 to 1000 rpms on idle.Valve adjustment hasn,t been checked nor compression at this point and there are no sounds or signs that would make me supicious of this problem. Also remember when static timed and motor cold it starts and revs like a stripped ape. Warmed up it begins to spit fire and start like timing is off. Time it by ear (best sound and rev response with out spitting) and with advance off and plugged I can't even see the timing mark on the balancer.
Thanks again,
Rick