Thread: 283 questions...
-
05-24-2004 01:53 AM #1
283 questions...
I just got a 283 for 500 from a friend who replaced it with a 406...i am going to put a holley 600 and edelbrock performer rpm on it to replace the 2 barrel setup...this is all going into a 79 280zx...i was wondering if anyone out there could tell me what to do with the engine down the road to make it a little faster...also, it has power pak heads....any idea what it would be at in hp with the parts i have stated? the rebuild he has on it is 500 miles old as well...
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
05-24-2004 05:32 PM #2
I am not really looking for fast, i am looking for high revs and old quality, i only have the 283, in searches for a 350 i have turned up empty handed around here, so i took what i could find, he put the 406 in there because he wanted his nova to be big, i just want my z to move...i want to get a compression ratio of at least 10:1, so any help for getting me there would be great, nothing too big is planned besides that...it has power pak heads, does anyone know where i could find info on them?? the corvette had fuelie heads and a 4 bbl carb, so my setup shouldn't be too far off....at least in looks...i just want a good engine that's old and runs nice...nothing extremely fast, and not a torque monster...just small and moving....any suggestions on what to do with the 283 to keep it sane without dumping a lot of money on it would be nice...thanks for your advice tech, but any suggestion other than go bigger would be appreciated...
-
05-24-2004 10:19 PM #3
i did read your post, and i told you i wanted everything you said i would get from the 283....you did tell me to keep the 2 barrel, but i was wondering what else i could...i will check the heads when i get a chance...thanks for the site...sorry if it sounded like i was being dumb or a smartass...i do want to know what i could do money wise to put just a small bit more life into the lil engine...and i will be calling and ordering a cam that is suggested by the company when the time comes, so i won't ask what kind of cam you think i should get....
-
05-25-2004 01:43 AM #4
283 chev engine are ok i have a fuelie 57 and that car is still fast with a little work my engine revs 9200 rpm would go 10000 but had truble with valve springs and you can mess with the 350s i have that also but today my new one is a small block chev 472 now this one could pull trees this one is new and havent been on the track yet don vintage racing also have a 12port 6cy could suprise many out the of its performance donorlougeorge@msn.comvintage tin racing don george ee nasa
-
06-01-2004 03:03 PM #5
this is my 283........
in that vega in the background it ran the Quarter Mile: 12.56 s @ 111.8 mph-> 0-60: 3.7 s........ that was with nos. So dont think it wont run good and strong!! need any other info ?
Thanks guys! One more trip around the sun completed. Lots of blessings and things to be thankful for (like still being able to type this message!!) Here's to us "over 70 guys.." Glenn
HBD Glenn!!