Thread: help with head casting, im lost..

Tweet

i cant seem to find out what casting number my new heads are; im trying to get flow numbers on them. they're 2.02/1.6, 72cc chamber, but i doubt that was stock im sure it was machined. ill include a pic of the head, shows the marking on one of them.

http://www.mortec.com/location.htm

Looks like double-hump of some type. There are accessory holes so they're not 461 or 461x.
All you have to do is take off a rocker cover and look for the casting number down between the springs,
then compare to the chart at:

http://www.angelfire.com/tx5/randysr...Headguide.html

Don Shillady
Retired Scientist/teen rodder