Thread: cam bearings
Results 1 to 3 of 3
LinkBack URL
About LinkBacks-
07-28-2004 02:46 PM #1
CHR Member
- Join Date
- Oct 2003
- Location
- donkin
- Car Year, Make, Model: 1969 pontiac fierbird
- Posts
- 64
cam bearings
I just got my block back from the machine shop after having cam bearings installed and it looks like none of the oiler holes are lined up. Are the holes in the mains and the cam bearing oil holes supposed to line up? Any advice appreciated Thanks
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
07-28-2004 03:43 PM #2
CHR Member
- Join Date
- May 2004
- Location
- east coast
- Posts
- 79
if the block is later than 56 then it doesnt matter or if your NOT using a wide rear bearing with two holes. there is a ring that is machined inside the journal that will allow the hole to be positioned anywhere.
i always do install the holes lining upLast edited by junior; 07-28-2004 at 03:47 PM.
"IT'S 106 MILES TO CHICAGO , WE GOT A FULL TANK OF GAS , HALF A PACK OF CIGARETTES, ITS DARK, AND WERE WEARING SUNGLASSES"
"HIT IT"
BRIAN
-
07-28-2004 05:22 PM #3
CHR Member
- Join Date
- Aug 2003
- Location
- CC
- Car Year, Make, Model: 70 Camaro Z-28 Now/40 Chevy Back Then
- Posts
- 4,306
You could always blow air in the main bore hole and see if air comes out of the cam bearing hole, just as a "Double check"."PLAN" your life like you will live to 120.
"LIVE" your life like you could die tomorrow.
John 3:16
>>>>>>
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Ok gang. It's been awhile. With everything that was going on taking care of my mom's affairs and making a few needed mods to the Healey, it was June before anything really got rolling on this...
My Little Red Muscle Truck