Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: 32 chassis measurements
          
   
   

Reply To Thread
Results 1 to 4 of 4
  1. 10-22-2003 09:57 PM #1
    topsterguy's Avatar
    topsterguy
    topsterguy is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Sep 2003
    Location
    Victoria BC
    Car Year, Make, Model: 32 Ford Phaeton / 40 Ford pickup
    Posts
    120

    32 chassis measurements

     



    Now that my 32 roadster's been on the road for 6 years I'm building the 32 5-window I've been wanting to do! I've bought a set of those new stamped rails from Hot Rods and Horsepower, after a lot of asking around - seems they're THE ones to use now. A friend is building the chassis and he's one good fabricator, but I was wondering about the measurements for where the cross members, trans mount/"K" member etc go. I know Wescott's catalog has all the frame hole measurements but what about the rest? Any suggestions and tips would be appreciated! As I mentioned before, I used a TCI chassis on my roadster so it was all done.
    "nobody likes a top on a roadster, but it's nice to have one in the trunk when you need it!"See us at www.topsters.com
    Reply With Quote Reply With Quote
  3. 10-22-2003 10:22 PM #2
    Bob Parmenter's Avatar
    Bob Parmenter
    Bob Parmenter is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Apr 2001
    Location
    Salado
    Car Year, Make, Model: 32, 40 Fords,
    Posts
    10,869

    The Wescott catalog has all the measurements.
    Your Uncle Bob, Senior Geezer Curmudgeon

    It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.

    Luck occurs when preparation and opportunity converge.
    Reply With Quote Reply With Quote
  4. 10-22-2003 10:37 PM #3
    topsterguy's Avatar
    topsterguy
    topsterguy is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Sep 2003
    Location
    Victoria BC
    Car Year, Make, Model: 32 Ford Phaeton / 40 Ford pickup
    Posts
    120

    Thanks Bob! From what I've seen of your posts/answers and from several others, this is a great site to be part of! LOTS of good tips and info!
    "nobody likes a top on a roadster, but it's nice to have one in the trunk when you need it!"See us at www.topsters.com
    Reply With Quote Reply With Quote
  5. 12-16-2003 07:58 AM #4
    rocknrod's Avatar
    rocknrod
    rocknrod is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Oct 2003
    Location
    Waco
    Car Year, Make, Model: 1932 Ford, 5 window coupe, highboy
    Posts
    283

    If you need a Print for a 32 frame here's one:
    http://cgi.ebay.com/ebaymotors/ws/eB...category=10076

    I bought one myself.
    Reply With Quote Reply With Quote
Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink