Thread: Gas tank removal
Results 1 to 3 of 3
LinkBack URL
About LinkBacksHybrid View
-
03-21-2007 07:13 PM #1
CHR Member
- Join Date
- Feb 2006
- Location
- Elgin
- Car Year, Make, Model: 57 Studebaker Hawk
- Posts
- 32
Gas tank removal
I have an all steel 32 5 window coupe. It has a stainless steel gas tank. I want to install a Tanks electric fuel pump inside the tank. Does the body have to come up to get it out and also is the tank flat enough on the top to install a Tanks electric fuel pump?
Thanks,
WadeDrive it like you stole it
-
03-21-2007 08:32 PM #2
CHR Member
- Join Date
- May 2004
- Location
- Tsawwassen
- Car Year, Make, Model: 32 Roadster, 33,3 Wd Coupe
- Posts
- 17
I was just working on this problem today. I measured where the fuel pick up and sender are located on the tank, and then transfered these measurement to the floor pan in the trunk, and used a hole saw and drilled the floor pan.
Tomorrow I will make a removable cover for this acces hole.
HemiDeuce.
-
03-22-2007 07:03 AM #3
CHR Member
- Join Date
- Sep 2006
- Location
- Deuceland
- Car Year, Make, Model: 32 Roadster, 32 3W and 2004 HD " Deuce"
- Posts
- 440
This is a photo of a 32 original tank. I do not know about a repro stainless tank ... but I know to get the electric in tank fuel pump installed ... the tank would need to be out. The edge where the Stewart Warner fuel level sending unit ( added by me ) and the original fuel pickup are ... is not very wide. 3 inches or less.
Going 33 and 1/3 rpms in a IPOD world
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Several years ago we did quite a good trip of USA, and on our trip we got to meet Mike and Christine Frade. We didn't stay long with them, but in that relatively short time we both gained a great...
We Lost a Good One