Thread: Tru Fire or Realistic flames
-
06-01-2008 10:11 AM #16
If you want to use them, I think these examples show that...
...a little bit goes a long way on a dark base...
...but with a light base, it may take more to achieve that impact.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
06-01-2008 04:32 PM #17
Yes less if often more!
Originally Posted by HOTRODPAINT
-
06-01-2008 06:53 PM #18
Here is a pic of a car that was on ebay that I think looked sharp.........Go Hokies!!!!!! ACC CHAMPS '04,'07,'08
4-16-07
-
06-01-2008 06:58 PM #19
Originally Posted by stylingZ
-
06-01-2008 07:28 PM #20
Thanks for the Pic
Originally Posted by youther
-
06-01-2008 07:38 PM #21
Hotrodpaint...If I lived closer to Arizona I would have had you do my work because I've clearly seen the high quality you turn out. Yes I've put tons of thought into this whole build. Josh at www.JEIllusions.com is painting my tru fire flames in his "killer flames" design...on his website those flames are on page 4 under tru fire flames. His depth is fantastic with 3D effects and his motorcyle painting is winning all the shows. I'm supposed to get the roadster back June 13th and then the cutting/buffing will begin. Have a good one.
-
06-01-2008 07:53 PM #22
Thanks, but I would be hard pressed to produce any better job than your painter does. He has clearly practiced these flames for a while, and that always leads to a more refined job. I haven't had many requests for this style, so I am still in a learning curve.
-
06-01-2008 09:17 PM #23
Personally I like flames done both ways - if they fit the car. Took these at Daytona Turkey Run last year. The paint was soooo good that the reflection of the ground caused an interesting contrast in the pic. D
-
06-01-2008 10:28 PM #24
My opinion?
The flames need to match the style of the car. Flames aren't for everyone but it's your car, so flame away.
Personally- real flames on a Deuce are way out there & if you are thinking of this route- I'd have them photoshopped on a side view of your car before I went further. I spent a year planning my flames in my head & on paper.
Real flames, tribal flames, skulls, crab claws, traditional, hooks, overlapping, skinny, fat, ghost, etc etc etc.
Lots to choose from & only one may look right on your car.
-
06-01-2008 11:00 PM #25
Today- I went to the Pomona Swap Meet, mostly to get up & personal w/flames.
To be honest, there wasn't much that caught my eye. I was mostly looking at color usage & fade- as well as pinstripe colors.
We talk color of flames on my car tomorrow!!!
1st pic is a 38 Plymouth coupe that caught my eye. Lots of work in these flames & a ton of airbrush work. They were double flames w/ a darker color on front of the car & fenders. I wonder how a very subtile realistic flames air brushed into the confines of a traditional flame would look? Car was killer except he did the roof too & that was waaay overdone IMO. Should have stepped back & got a complete car shot. Note the lime green pinstripe- in pic, iit almost disappears.
Here's 2 pics of a 41 Willys painted in some hideous watermelon color. However, the flames kinda worked for me.
The next three pics are on a 40's SD & the flames are wonderful. A bit thin & whispy for me but the color & fade are great. A little too yellow for me- mine will have more orange & red in the design w/ the yellow up front.
-
06-01-2008 11:51 PM #26
2 tone cars are tough to get right.
This one is right.
Same car- different show.
Last edited by Steves32; 06-01-2008 at 11:56 PM.
-
06-02-2008 12:03 AM #27
-
06-02-2008 12:08 AM #28
-
06-02-2008 12:15 AM #29
-
06-02-2008 12:23 AM #30
Thank you Roger. .
Another little bird