Thread: Project American Graffiti Coupe

Tweet

Hey Guys,

Here are some up dated pictures of the chassis. Tonight I installed the K-member brace (just like Milners) and the 1940 rear crossmember. The crossmember was installed by welding square tubing at the top and bottom of the frame. This kept everything in place while I installed the 40 rear crossmember (only top tube was taken off as I was to tired to take off the bottom) . The crossmember was placed so that the rear end will sit on the back side of the wheel wells (just like Milners). For those of you who didn't know, Milner's coupe has a 40 rear crossmember and not a 32. The reason for this is to raise the back of the car for more of a rake as a 40 rear crossmember is 2" steeper than a 32. Next I will be notching the front crossmember (to clear the harmonic balancer) and cutting out the center of teh K-member to allow the T-10 (NOT A SUPER T-10 as this is a misprint in EVERY MAGAZINE) 4 speed in. Afer everything gets notched/cut it will be time for the boxing plates (stepped boxed). The original coupe DOES NOT have boxing plates but since this car is actually going to be driven it will get boxed. The KOOL thing about the stepped boxing plates is that if you look under the coupe it will still look like a stock chassis ! Finally after all of this is done the chasiss will be painted semi gloss black and then everything will start coming together so be on the look out!!!!!!

project 8-6-09 001.JPG

project 8-6-09 002.JPG

project 8-6-09 003.JPG

project 8-6-09 004.JPG

project 8-6-09 005.JPG

Keep up the good work!

Project, does the Arrow headlamps use a regular 7" 6024 round high-low beam bulb?

Originally Posted by Weasel Diesel

Project, does the Arrow headlamps use a regular 7" 6024 round high-low beam bulb?

Hey Weasel Diesel,

The Original Coupe and the ones I am building all have the high-low seal beams (halogen). These are a standard 7" headlight so you can buy them at any auto parts store. If you are going to drive your coupe I strongly suggest using the halogen lights as they are much brighter which means a lot safer . If you are looking for a set I can set you up with a guy that sells the correct Arrow 775H headlights with the halogen lights already installed in them (this is where I got mine)????

I was just double checking the bulbs. Ed is gonna fix me up with a pair.

Originally Posted by Weasel Diesel

I was just double checking the bulbs. Ed is gonna fix me up with a pair.

Good Deal as Ed has the correct lights! To be honest, I didn't know if Ed still had any in stock but I am glad to hear he does !

OK Guys and Gals,

Here is the latest update on the Graffiti Coupe Project. I have now since moved the chassis back over to my little garage to finish it out. The chassis has now been cut in all of the correct places so now it is getting close for the time to start boxing the little devil up. The front cross member has been notched for the harmonic balancer and the K-member has had the center cut out for the T-10 four speed to go through. The rear frame horns have been bobbed so now it will be time to add the special Milner bumper as I have the brackets made, I just haven't added them to the chassis yet (YES, I'm that slow). I now have the front end installed so I can line up the top shock mounts (PLEASE take note that the shocks on the front end WILL NOT be used as I am putting on the correct movie style shocks on). I have also added the engine, bell housing, and tranny. This was done to make sure everything is in it's proper place. You will also notice that I have now put in the correct tranny mount (at the present time just clamped in) as I had to make sure everything was squared away. The next things I will be doing on my list is adding the the correct shock mounts and shocks, the correct brake line brackets, bolting in the tranny mount, adding the old master cylinder bracket to the K-member brace, installing the rear bumper and finally adding my special boxing plates (stepped boxed from rear of K-member to front of rear cross member). After all this is done the chassis will be sand blasted down once again, sanded down, primered and painted. I hope you enjoy the NEW PHOTOS!!!!


Coupe Project 08-15-09 001.JPG

Coupe Project 08-15-09 002.JPG

Coupe Project 08-15-09 003.JPG

Coupe Project 08-15-09 004.JPG

Coupe Project 08-15-09 005.JPG