Thread: Trying to find, Deuce Coupe rear roll pan

Tweet

I'm trying to find a fiberglass rear roll pan for a '32 Ford 3 window Coupe body. I've talked to Steve at Raven's but his fits a roadster. Looked at the Superior Glass Works coupe pan, but don't want the recess for the license plate. Where can I find other Deuce coupe rear roll pans?

Mike

Yea- the Superior one has a recess for plate. You could fill it.


Here's what you want- only in steel.

http://www.roadstershop.com/products...euce-roll-pan/

Oops- that's a roadster.

Be Bops has a glass one but no pic. Call them.
http://www.carolinarodshop.com/bebops/bodies_32.html

I think new age has one. Some of their cars on their site have them.

i ordered mine from wescott

I have a 5 window, got mine from Wescott. It fit perfectly.

Outlaw Performance also has one

Dan

New Age Motorsports has them! http://www.newage-motorsports.com

Thanks to everyone for your help. I'll be making a few calls Monday morning. The problem I'm having is, most rear pans are for roadsters or 5 window coupes, the 3 window coupe is different.

Thanks again,
Mike

I have an older Superior roll pan for my 32 Coupe that does not have the license plate recess. I may not be using this part. If you are interested, I will template the body above the gas tank and verify that it will fit. Plz advise!

Ronbo, I replied to your PM, thanks.

Mike

Plz resend , couldn't get it, or email me at
ron.peterson5@verizon.net
thx

Ron, I resent the Private Message and sent you an email.

Mike

Here are the results from the phone calls,

Wescott, no luck, they only have one for the roadster and 5 window.

Outlaw, this call surprised me. I explained to the receptionist why I was calling, she said that she would transfer me to a very knowledgeable person that could help, his name was Hairy. He told me they had one. When I asked if it was for a 3 window coupe or a roadster, he said it didn't matter, the '32 Ford bodies were all the same. ????

New Age, this call was great. When he answered the phone, I introduced myself and told him where I was from, the Tampa, FL area. His first response was, "I don't have a rear pan for you". I'm thinking, how the h~ll did he know why I was calling??? It turns out, he has been reading our boards, we both had a good laugh.

BeBops, I didn't call them. Duane at N&N has used one of their rear pans before and told me it required a LOT of work to get it to look right.

I'm still open to suggestions!!!

Thanks,
Mike

Outlaw only makes a 3-Window body for 1932 so that is what they have. I have one of their bodies, and the rear pan gives you plenty of extra so you can trim the bottom as you see fit. I glassed mine to the body, and I can tell you it is a good fit to their body. You could also check with Redneck at www.redneckstreetrods.com which is located in MO. They make a good body, and they may be able to help you also.

Lynn, thanks for the heads up on Redneck. I just called and spoke to Tim, he's going to email some pics and pricing.

I've seen the pics of your '32, IIRC, there were only 4-5, do you have any shots of the rear of your car?

Mike