Thread: Master cylinder clearance problem

Tweet

I used the filler assembly for I/O boat . Has flange w/ 3 drilled holes - mount to floor-center un-screws to fill fuel. Center the fill cap over master cylinder top. You must still remove m/c cap from under car but have direct access to fill . Screw center section back in, lay carpet back over-never know it is there! Note you must cut tubing connector off of flange where fuel hose would go to boat tank but that is only modification needed. You can also mount on top of carpet and just put floor mat over to hide. They are chrome so looks nice even w/o mat if needed.