Thread: Steering Column Lenght

Tweet

Hi Looking to buy a steering column. Is there a certain length to use in a 32 3 window coupe. I am having a bench seat inside with no package tray. I am 6 '1 so leg room was an issue. Who sells a good column ? I see lime works offer one with a column shift. Are those hard to install?

For length the cookie cutter answer is 32", but I'd recommend you do a mock up to verify that that works for all of the other factors you're working with. With your height you are likely putting the seat as far back as you can, so a 34 might be better.........or not. Dished wheel or flat? Makes a difference. People are built differently from one another. Some are longer in the leg, others in the torso, even though overall they may be the same height. Makes a difference. It comes down you your personal comfort.

Mock in the seat as close to where and how high it will sit (including accounting for cushion compression). I like to use a broom handle or similar dowel, though a length of conduit or pipe would work too. Depending on your steering box type and location longer or shorter may work, and if you need two or three universals to clear engine stuff and whatever else.

If you use a mock up column/wheel combo you can account for all those variables and more (including belly if appropriate).

Limeworks is quality goods, and Steve will give you all the help you need to install it correctly.

I like to use a mid to late 70's Chevrolet/GMC van tilt. I have one in each of my 32 Fords. For me ... they are perfect.



They are small and have the tilt level and a automatic shifter. They have NO key and they have the P-R-N-D-L2-L1 indicator built on the top of the column.



Here is one mocked up in my 32 3W ...







And here it is finished ...



I am 6 foot 2 inches tall and overweight
The coupe is very comfortable ... even with a 400/500 mile trip ( one day ).



The columns usually cost $125 or so in my area ( at the salvage yard ).
You can also buy a shift indicator lense for them that is for the 700R4 ( OD )

.

Here is one just installed this week in another 32 roadster for a friend ...





This is a firewall side shot of one in a 32 sedan ...

As Bob says, 32" is usual but there are lots of issues that may come up, Mock every thing in place and measure twice.
Steve at Limeworks will fix you up with a quality bit of kit, Or the Speedway columns are good too.

FWIW, I used a 32 inch IDIDIT column. The regular steel type was not all that expensive.