Quote Originally Posted by racerx1699 View Post
Jack
It's Unisteer, anything I need to know? Like I said before, I've never done a project like this, I need all the help and advice I can get, nothing will hurt my feelings.
Not really. Unisteer doesn't have an "old school" look, but it eliminates a lot of the possibilities of bump steer that you get with a M-II box and Pitman arm. There were days lately that I wish I had one. You should have a pretty simple steering column setup. A drop at the dashboard, a plate at the floor, some double-D shaft, a column to double-D shaft adapter/u-joint and a steering box to double-D shaft adapter/u-joint. I mocked everything up with wooden dowels with the seat in the car before I did any cutting. If you're going with "fancy" stuff, Ididit has everything you need. I used Borgeson u-joints/adapters.