Thread: Wiring pics?

Tweet

Hello everyone. I was wondering if anyone has any pics of wiring detail on their 32. After deciding where to put the coil and ignition module, I will be ready to start the long and tedious wiring task. I am using an "EZ" wiring harness.

Does anyone have any pics of how they have concealed the wires in an engine compartment? Elsewhere, the wires will be routed through the boxed frame, but under the hood, there is too many wires to totally conceal.

Or if not, is there a good site you would recommend looking at?

Thanks for any tips or suggestions,
Greg

I don't have any pics of it, but when I did my 32 a few years ago, I ran all the wiring in the engine compartment thru some of the extra brake line tubing I had. It polishes up just like chrome, and looked like it belongs there. I reflared the ends where the wires exited the tubing so it wouldn't cut them, and made for an overall clean and neat appearance.

Thats an idea. I could maybe run the line up around the bellhousing to the backside of the engine. Might take two on the left side for the coil and ign. module wires, and one on the right for temp sending unit and elec. choke wires. Sounds like a good idea! Lemme think about it for awhile.

Thanks for the response!
Greg