Thread: Performer-EPS
Results 1 to 7 of 7
LinkBack URL
About LinkBacksHybrid View
-
02-26-2005 09:41 AM #1
CHR Member
- Join Date
- May 2004
- Location
- Ashland
- Car Year, Make, Model: 29 fendered roadster
- Posts
- 2,160
Denny,
I am fighting off a bad cold and the carb is covered with tape but all I can see is the numbers 1406-195 on the passenger-front side of the carb and it has a black plastic cover on what looks like an electric choke. At the moment I have misplaced the papers that came with the carb for the exact model so all I know is it is an Edelbrock 600CFM with an electric choke and the numbers 1406-195. I did find the papers for the Performer-RPM and it recommends a 750CFM carb so the combination was not right for a 600CFM. It may be a day or two until get over this cold and can get into the garage to swap the manifolds, so if you find out something else I should know tell me.
Don Shillady
Retired Scientist/teen rodderLast edited by Don Shillady; 02-26-2005 at 11:48 AM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I wore a camouflage T-shirt once. The response in the pub was "Oooh, it's a floating head!" .
the Official CHR joke page duel