Results 1 to 5 of 5
LinkBack URL
About LinkBacks-
06-22-2005 12:26 PM #1
Registered User
- Join Date
- Jun 2005
- Location
- Auckland.New Zealand
- Car Year, Make, Model: 68 impala 2dr hardtop
- Posts
- 1
350chev
can I please have info/guide to firing order,what happens if rotor out 180*?When installing HEI,can #1post be moved by turning oil pump gear to desired location & re-aligning rotor?May sound stupid,but i cant find this in manuals i have.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
06-22-2005 01:50 PM #2
CHR Member
- Join Date
- Aug 2003
- Location
- california
- Car Year, Make, Model: 57 chevy 2dr ht
- Posts
- 97
if out 180 you can turn the cap 180 but its best
to find #1 top dead center in firing position and
setting it right
-
06-24-2005 10:19 PM #3
CHR Member
- Join Date
- Jun 2005
- Location
- Eston
- Posts
- 2,270
Pull the distributor, turn it 180, and put it back in. The oil pump drive will line up all right.
-
06-26-2005 03:10 PM #4
CHR Member
- Join Date
- Jun 2004
- Location
- Gonzales
- Car Year, Make, Model: 73 camaro RS
- Posts
- 252
Get #1 cylinder at top dead on the power stroke and find out where your rotor is pointing, then rewire your plug wires from there, if they reach the new locations on the cap. If not do what R Pope said, but I have had some trouble getting that distributor to drop right back into place since the oil pump drive turns when you pull the distributor out.
-
06-26-2005 04:13 PM #5
CHR Member
- Join Date
- Jun 2005
- Location
- spring
- Car Year, Make, Model: Hot Rod Suburban
- Posts
- 142
firing order is on the intake. 1 8 4 3 6 5 7 2Chevys for life
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Thank you Roger. .
Another little bird