Thread: 400 block/350 heads
Results 1 to 5 of 5
LinkBack URL
About LinkBacks-
08-13-2005 01:06 PM #1
CHR Member
- Join Date
- Aug 2005
- Location
- marysville
- Car Year, Make, Model: whats left of a 89 samuri
- Posts
- 3
400 block/350 heads
i know you cant do this without drilling steam holes right?well what would happen if you did?i picked up a 400 last week but by the numbers its a 400 block and 350 heads.the guy i got it from said it ran fine .until one day it poped and started smoking badly and had a knock.i got it for free so if it is junk ohwell the crank still looks ok no majior marks.can someone enlighten me?point and shoot kinda like skiing but going uphill
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
08-13-2005 06:41 PM #2
CHR Member
- Join Date
- Jun 2005
- Location
- Eston
- Posts
- 2,270
Did you check the heads for the holes?
-
08-14-2005 07:21 PM #3
CHR Member
- Join Date
- Aug 2005
- Location
- marysville
- Car Year, Make, Model: whats left of a 89 samuri
- Posts
- 3
??
yes i did no holes what what would it ruin first the head, block,head gasket or what?point and shoot kinda like skiing but going uphill
-
08-14-2005 07:33 PM #4
CHR Member
- Join Date
- May 2003
- Location
- Zephyrhills, Florida, USA
- Car Year, Make, Model: '32 Henway
- Posts
- 12,423
You have the results right there to look at.PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
-
08-26-2005 12:43 AM #5
CHR Member
- Join Date
- Aug 2005
- Location
- Prince Albert
- Posts
- 29
i wouldnt blame smoking on the smaller heads. 350 heads are safe on a 400. ive been building engines for quite some time and if i dont have 350 heads if im building a 350. on go the 305 heads. its the 262 heads on a 400 that would be bad.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Thank you Roger. .
Another little bird