Thread: What kind of power
Results 1 to 2 of 2
LinkBack URL
About LinkBacks-
09-13-2005 12:28 AM #1
CHR Member
- Join Date
- Jul 2005
- Location
- midland
- Car Year, Make, Model: 1979 Pontiac Firebird Trans Am
- Posts
- 95
What kind of power
355 block
Holly 600cfm carb
Carb Plate Nitrious System 75hp
Holley intake 1000-6500
Stock heads
Crane camshaft http://www.cranecams.com/?show=brows...tType=camshaft
9:1 compression
Stock HEI ignition
Forged rods and Pistons
2500 Stall
Turbo350
12bolt rearend
3:73 gears in the rear
What kind of power do you think i'll be looking at on the motor at the fly wheel.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
09-13-2005 01:12 PM #2
CHR Member
- Join Date
- May 2003
- Location
- Zephyrhills, Florida, USA
- Car Year, Make, Model: '32 Henway
- Posts
- 12,423
The weak link in your quest for power will be the stock heads. Go through this list of 108 dyno tests and pick out the 350/355 builds. You'll see that the combinations making the good numbers are using aftermarket heads. Note also that these are all street motor builds using reasonable compression ratio...
http://www.ryanscarpage.50megs.com/combos1.htmlPLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Thanks guys! One more trip around the sun completed. Lots of blessings and things to be thankful for (like still being able to type this message!!) Here's to us "over 70 guys.." Glenn
HBD Glenn!!