murray dave,yip you have to pull fan,fuel pump,whatever brackets that connect to water pump etc..pull water pump,behind water pump in timing cover is 4 biolts.two right two left.the 4 front bolts on oil pan.2 on right 1/2 and7/16 and same on left. those hold timing cover from bottom.then pull the crank pulley.cover will pry off.careful of aluminum!you will pick up a timing cover gasket set.it will come with 2 water pump gaskets.1 for plate to pump and 1 for pump to timing cover.1 timing cover gasket,fuel pump,timing cover crank seal,oil pan to timing cover seal,and 2 cork pan gaskets for the little ears of pan gaskets that came off between timing cover and oil pan.you will get coolant in oilpan.pull plug on pan and leave it out till youre done.i just got done doing it agail last week.the reason i know so well is because the first time i did it i put the pump seals in backwards meaning front gasket in back and vise virsa. SO DONT DO THAT!good luck hope it helps some!!