Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: turbo question
          
   
   

Reply To Thread
Results 1 to 4 of 4
  1. 01-09-2006 10:38 PM #1
    nitrus1's Avatar
    nitrus1
    nitrus1 is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    springfield
    Posts
    8

    turbo question

     



    i was wondering if its posible to twin turbo a 383 chevy with a 650 asprated intake system i now how to plum it but didnt now if it was posible with a holly non injected...
    Reply With Quote Reply With Quote
  3. 01-10-2006 05:40 AM #2
    dizzle
    dizzle is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Aug 2005
    Location
    n/a
    Posts
    27

    i take it you want to use a blow through system for your holley carb? its definitly doable, there was an article in car craft a few months ago about guys using blow throughs with dual turbos. making lots of power. i'll see if i can dig up the issue.
    Reply With Quote Reply With Quote
  4. 01-11-2006 10:18 AM #3
    dizzle
    dizzle is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Aug 2005
    Location
    n/a
    Posts
    27

    couldn't find the issue. but if you go to this website there's some folks there that have been there done that, good luck..jason
    http://www.turbomustangs.com/smf/index.php?board=20.0
    Reply With Quote Reply With Quote
  5. 01-11-2006 10:20 AM #4
    dizzle
    dizzle is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Aug 2005
    Location
    n/a
    Posts
    27

    http://www.turbomustangs.com/smf/index.php?board=20.0

    sorry i screwed up the link..you'll have to cut and paste if this didn't work.
    Reply With Quote Reply With Quote
Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink