Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: i think its screwed
          
   
   

Reply To Thread
Results 1 to 3 of 3
  1. #1
    canadianal's Avatar
    canadianal is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2004
    Location
    waldeck
    Car Year, Make, Model: 66 ford custom,27 t bucket
    Posts
    683

    Unhappy i think its screwed

     



    nice day here today took my snowmobile out was running like crap knew what was wrong jets plugged up from sitting all summer , so i took the carbs off and cleaned them put them back in and away i went . got about 2 miles down the road and the engine seized right up. i dont know if it was me or if the couple back fires prior to claning the carbs did it but the oil injector tube on the lt cylinder was off and i drive it 2 miles on a warm day with no lube.
    got it back home and its fires but now will not start. and the engine is tight.
    like i said i think its scewed.

  2. #2
    R Pope is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2005
    Location
    Eston
    Posts
    2,270

    The plugged jets leaned it out and fried it. I think you're right, its screwed.

  3. #3
    canadianal's Avatar
    canadianal is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2004
    Location
    waldeck
    Car Year, Make, Model: 66 ford custom,27 t bucket
    Posts
    683

    well i got the thing started tonight i had put some oil in the cylinders and let it sit and went and it fired up after a couple pulls. i am shure its going to need rings and pistons but the bottom end sounds ok. no bad noises

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink